Smart broom and mop without robot prices


Roborock Dyad Pro in white

Roger Vengas / Android Authority

Roborock revealed a little surprise in CES 2023 In the form of the Dyad Pro, a smart vacuum cleaner is not real robot Like the new S8 line. Instead of driving itself, you can control it like a traditional stand-up unit – the difference is that it can switch between suctioning and mopping automatically, so there’s no need for a separate mop, or even switching accessories. I recently had a chance to test it out, and for the most part I was very pleased.

About this Roborock Dyad Pro review: I tested the Roborock Dyad Pro for one week. The module was provided by Roborock, but the company had no say in the direction of the content posted.

Roborock Dyad Pro features and design

Roborock Dyad Pro in sunlight

Roger Vengas / Android Authority

Cosmetically, the Dyad Pro is neat. It’s primarily plastic, but it feels well-built and a bit futuristic — you won’t mind tucking it into a corner. The round LCD screen shows you battery life, Wi-Fi status, and a DirTect sensor gauge, which indicates how dirty the surface is with an increasing red bar. This dirt gauge is more useful to the vacuum than its users.

Key features of the Dyad Pro are flipping between suction and mopping automatically, and a base that enables self-cleaning and drying functions.

As its name suggests, the Pro is an upgrade from Roborock Dyad standardwhich lacks any smart functions. The Pro also adds a cleaning solution dispenser, better edge cleaning (more on that later), and longer battery life. Roborock estimates up to 43 minutes of runtime for the Pro versus 35 for the regular Dyad.

Roborock Dyad Pro reels

Roger Vengas / Android Authority

To support the wiping capabilities, the Pro includes clean and dirty water tanks, as well as a pair of dedicated rollers that rotate in opposite directions. It is capable of suctioning up to 17,000Pa, at least as long as you leave the vacuum in Turbo mode. This is powerful, though not amazing.

The Pro includes a dock that enables charging, self-cleaning, and drying, the last of which is another feature missing from the standard Dyad. The default silent drying mode takes three hours, but you can set this to anywhere between two and six hours, or use the noisier quick drying option if you need to clean again as soon as possible.

Roborock Dyad Pro in its dock

Roger Vengas / Android Authority

Self-cleaning can be scheduled, triggered manually via a button, or (if you change settings) automatically when docked. On top of that, there are Balanced/Standard and Deep self-cleaning modes, though we found the former to be good enough after most messes. I also suggest keeping the self-cleaning for those times when you don’t mind the noise. While the process only takes a few minutes, it’s so noisy it drowns out the TV and conversation.

There are three buttons on the handle: Power, Self-Clean, and Mode. The multiplication mode cycles between Auto, Max, Floor-Drying, and Eco options. I left it in Auto most of the time, because that balances the power dynamically.

Roborock Dyad Pro handle

Roger Vengas / Android Authority

Roborock app

Roborock app is available for android And Iphone. It’s also a good thing, because when I was pre-launch testing the Dyad Pro, I couldn’t get my iPhone to pair properly — the app would connect the void to my Wi-Fi, but then fail to connect my iPhone to the void. In contrast, the process was completely seamless on the OnePlus 9, and pairing there forced the Pro to appear in the iPhone app. Roborock is aware of this issue, so we hope it will be resolved in a short time.

When it’s up and running, the Roborock app’s interface is generally intuitive. On its main dashboard, you can select a self-cleaning or drying mode, then choose to start right away or schedule for a later time. You can’t, unfortunately, set up a regular self-cleaning schedule, but you can schedule it up to 24 hours in advance.

Roborock’s interface is generally intuitive, with the exception of a few “hidden” settings.

If you click on the gear icon, you can change the suction power, water flow and drum speed. I suggest leaving the suction on Turbo (maximum) and the drum speed on Fast, but the water level can be set to medium and still get results. Turn it up high if you’re having trouble with floor stains or detergent streaks.

What’s a bit counterintuitive is that some settings can only be accessed by opening the three-dot menu at the top right. This includes things like firmware updates, the duration of silent drying, and the option to trigger self-cleaning the moment you dock.

If you tweak enough options and don’t care about scheduling, you can use Pro without touching the app more than once or twice. However, the connection is really useful.

How well does Dyad Pro actually clean?

Roborock Dyad Pro LCD Screen

Roger Vengas / Android Authority

Very good, in general. And with do-it-yourself renovations, winter muck has invaded the house, and I’ve had a five-year-old son have more than a few chances to test it out to the fullest.

Using the vacuum cleaner is a little awkward at first. To get started, you have to lift it from the dock, open the stem by pressing on the base while pulling the handle, and then press the power button for a few seconds. If you are not familiar with the product, you may also not know what the other two buttons do. None of this is difficult, after all, but it’s also unintuitive enough that I decided to leave the Roborock instructions attached to the handle (as you can see).

I found the Pro to be relatively light and easy to maneuver, thanks to its ergonomic handle and weight distribution. Plus, its specialized rollers keep base size to a minimum without sacrificing cleaning space, and let you get closer to the edges of walls and furniture than regular brooms. You’ll still need a broom or nozzle vacuum to pick up stubborn rim debris, but that’s par for the course.

Edge cleaning with Roborock Dyad Pro

Roger Vengas / Android Authority

It works best with hard-core messes, as you’d hope considering Roborock boasts Pro suction power. I had no problem collecting crumbs, noodles, cereal, and even most pebbles pulled from the outside. In some cases, she was unable to get the pebbles out of the doormats, but those rocks were embedded deep enough that it was unreasonable to bring them up. In fact, the suction is strong enough that at one point, the Pro snapped one corner of those thick mops.

Performance is just as good with liquids and mud, but less impressive when mopping floor stains on wood and tile floors. It can handle many stains, especially if you use detergent and a high water flow, but some deeper stains may require multiple passes if they come out at all.

The Roborock Dyad Pro switches between vacuuming and mopping with such ease that it feels like magic.

What’s surprising is how well the Pro transitions between vacuuming and mopping depending on the surface it’s on. There’s often a delay of a second or so, but nothing major—I didn’t end up with any wet carpets, and for the most part, it did a good job of recognizing surface types. Technology feels like magic, as if it shouldn’t be able to switch so easily.

A feature that people might find alternately useful and annoying is how loud the product is. You regularly announce what you do, what you need, and any problems you encounter, like something tangled in reels. This means there’s a bit of confusion about maintenance, but you can’t minimize or turn off these alerts – just change the volume or language.

Speaking of maintenance, in my testing period I had no problems keeping the cylinders clean or having to empty the dirty water tank more often. Roborock provides a roller brush, but unless it sucks up things like yarn or dog hair, I wouldn’t expect it to be needed regularly. You’ll have to replenish the clean water tank every two to four sessions, assuming you wash floors regularly and start self-cleaning when you’re done.

Roborock Dyad Pro Review: Should You Buy It?

Vacuum the carpet with the Roborock Dyad Pro

Roger Vengas / Android Authority

One of the Pro’s attractive points is its $450 price tag. This is more expensive than many conventional vacuums or even a lot of lower-end robotic vacuums, but most equally priced competitors can’t do any mopping, let alone switch back and forth on the fly. First floor Tineco S5 ($499) is close similarity in features, but Dyad Pro offers longer uptime for less money (less discounts).

For the money, you get a solid all-in-one cleaning tool. The deciding factor may be how important the survey is to you. If you do something occasionally and in small doses, you’re better off combining a regular mop with a dry robot vacuum.

For the money, Roborock Dyad Pro is a powerful and smart all-around cleaning tool.

The Dyad Pro really comes into its own if cleaning your floors involves a lot of mopping, and you can’t sacrifice an entire paycheck for a robot like Roborock S7 MaxV Ultra ($1,399). Although you’ll have to do the work yourself, you can get most of it done fairly quickly, as there’s no changing attachments or squeezing anything into a bucket. You will only have to finish some points and edges after that.

Coincidentally, another application is home without much wiggle room. My current house is more vertical than wide, and with renovation materials blocking the hallways, the robot isn’t much help. Dyad Pro allows me to enjoy at least some of its amenities smart home cleaning technique.

Roborock Dead ProRoborock Dead Pro

Roborock Dead Pro

Smooth vac and wiper functions • Smart APP control • Light and maneuverable

Dyad Pro can sweep and clean your entire floor in one shot.

With its unique design, the Dyad Pro can switch between vacuuming and mopping automatically based on any surfaces its sensors detect. The mobile app enables enhanced settings and scheduling.



Source link

Related Posts

Precaliga